It can be used for coarse, short and long shank knives
Application:
– the shoulder milling
– increase
– hole expanding
Slump in –
– slot
— screw interpolation
A shoulder milling cutter used for rough and large machines
Cut to blade, with strong cutting edge, allowing high feed processing. It is highly rigid with thick core and suitable for heavy machining.
Features:
– high productivity, deep cuts
The thick net thickness of the blade is used for rigidity
– economic double sides, 4 tip insertion
Large dip Angle and inclination reduce the cutting force
Tangential insertion with a solid cutting edge
– excellent chip evacuation
4 cutting edge milling cutter for high feed processing
Thick and hard edged blade, combined with highly rigid knife body, has remarkable production efficiency.
Features:
– double-sided insertion, with 4 sharp and solid cutting edges
There are 2 dimensions, 3 levels, 4 angular radii
Excellent surface finish
The cutting force is lower because of the larger tilt Angle
– front rake face for smooth machining and vibration reduction
– high rigidity cutter body
High rigidity, lightweight shoulder milling cutter with low cutting force
On the outer edge cutting edge, the large dip Angle can provide the sharpness and double relief geometry, increasing the strength.
Features:
– can be used for coarse, dense, and additional short cuts
– insert wall straightness of 90 ° cape
– the small axial movement improves the surface quality
– the core cooling system applied to the cutter
High precision end milling cutter
High precision milling cutter provides low cutting force, high productivity and precision, equal to solid carbide end milling cutter.
Features:
– long cutting edge and high rake geometry
– can be used in various corners, from square to rounded corners
– special surface treatment to reduce friction and corrosion
– new clamping mechanism provides rigidity between insertion and valve body
– remove the screw to replace the insert