Insert

The geometrical shape of the cutting edge forms a compact wafer that is smaller than the width of the slot and helps the chip to evacuate. Fine chip evacuation improves the surface of the mechanical groove and reduces the time for cleaning clogging chips.

– Tung – UniversalSlot

The shape of the triangle creates a large area of continuously curled chips. The film is smooth and reduces the cutting force of cutting depth. Insert a large wiper edge and improve the surface roughness of the groove.

– Tec – TangentialSlot

Insert into four corners and withstand high cutting force

Processing wide groove.

Large windshield wipers not only improve surface finish, but also allow for axial input.

Insert:

THVKX

Groove width: 4 to 9 mm (0.157 to 0.354)

Angle radius: 0.2,0.4, 0.8mm (0.0078,0.015,0.031)

The corner radius of the special size will be provided as required.

WHNGU

Groove width: 9 to 16 mm (0.354 to 0.63)

Angle radius: 0.8, 1.6mm (0.031 “, 0.063 “)

The corner radius of the special size will be provided as required.

LHMEU

Width of groove: 16 to 25 mm (0.63 to 0.98)

Angle radius: 0.8, 1.6, 2.4, 3.2 mm (0.031, 0.063, 0.094),

0.125 “).

The corner radius of the special size will be provided as required.

Knife:

AHSV (axial drive) type: slope width between 4 and 9 mm (0.157 to 0.354)

AHSW (axial transmission)/TSW (radial drive) type: slot width 9-16

Mm (0.354 “0.63”)

AHSN (axial drive)/TSN (radial drive) type: slot width 16 to 25

Mm (0.63 “0.98”)

Tools designed specifically for special applications will be used

In the request.

The multi-grinder adopts an improved dovetail clamping structure and provides three times the advantages: the use of square, octagonal and round insertion in the same pocket.

– 8 angles and 16 corners with swallow-tailed structures for improving clamping rigidity:

– even in heavy machining, the insertion and shear force of the screws will decrease.

– the optimized geometry of stainless steel is high in nickel/chromium plating