— insert variety
Two types of insertions are suitable for the same knife body, providing rough and refined options.
High production roughing tools with serrated edges
Long blade rough milling and small chip effectively prevent flutter
Features:
– flutter design
Wavy cutting edges create smaller wafers to reduce flutter.
– smart and user-friendly design
Each flute (adjacent pocket along the radial direction) is cut into a Z direction. This positioning ensures that the inserted peak is inserted in the adjacent slot. Therefore, the surface of the machined wall is close to flat.
There is no need for a specific insertion location because the positioning is done on the cutter.
All blade cutting edges are the same.
The insertion Angle is enhanced to prevent the Angle from cutting off the bottom insert. (the bottom insert is an effective Angle, which can make the feed size equal)
— insert variety
Two types of insertions are suitable for the same knife body, providing rough and refined options.
Suitable for milling machining of small mechanical parts
Small diameter, super-tight cutter body is highly rigid, providing excellent chip evacuation. There are four cutting edge pieces with an economic advantage.
Features:
– small diameter, outside cutter body
Small machines are efficient
– economy 4 cutting edge insertion:
It is suitable for three grades of steel, stainless steel, cast iron and aluminum
Excellent chip evacuation
Cutting depth of 4 mm (0.157 in)
Excellent surface finish and accuracy of shoulder grinding
The helical cutting edge and big axial tilt Angle provide smooth cutting in semi-finishing.
Features:
– insert:
Spiral cutting edge for high wall accuracy
Excellent surface finish
The sharpness and reliability of the optimized rake Angle
4 chipset type, applicable scope is wide
Angular radius can reach 3.2 mm (0.126)
It can be used for DHLC coating and ceramic blade
– the blade:
The stomata used to improve the evacuation of chips